Show pageOld revisionsBacklinksExport to PDFFold/unfold allBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. **IQX won’t allow me to make a placement against a client** \\ \\ The client status needs changing from **Prospect** to **Client** \\ \\ * Make sure you are in the correct division * Open the clients form and change the **state** field accordingly in the top left box of the client record \\ **Note** Depending on how IQX has been configured, it may be that only authorised staff can change this setting \\ \\ See also \\ [[http://www.iqxusers.co.uk/iqxhelp/doku.php?id=ug1-17|Placements]]. \\ \\ Back to [[http://www.iqxusers.co.uk/iqxhelp/doku.php?id=2_FAQ_Section|FAQ Section list]] \\ Back to [[FAQ2-00]] faq2-02.txt Last modified: 2018/01/18 11:15by ivan